Questions & Conversations
Got a question about your models? Want to start a discussion? It's here!
- 103 Topics
- 266 Replies
I was looking into a ticket with a colleague and found a use case where a customer was using a Metric to track if an employee is ramped or ramping.The configuration is a simple metric, dimensioned by Employee and Month with a datatype of a Dimension (Used to flag whether an employee is ramping or ramped)Dimension Flag MetricDimension Flag Metric ConfigurationThis works perfectly when bucketing sales into either being made during the Ramping/Ramped phase to help with forecasting. However, if you want to account for quarters you end up with values in Ramping and Ramped. To account for this I assigned a value to each dimension Then I aggregated the values in a Metric dimensioned by Quarter instead of Month I was then able to create a similar metric to before, but this time, if any month in the quarter contained ‘Ramping’ the whole month, would display as ‘Ramping’
Dears,I created a new metric in which I subtract two metrics that have the same dimensions. Since the metrics are coming from different transaction lists that share the same dimension (customer email) , one frome Resquests MRR BE and the other from BillsMonths I dont share the same customer email in both metrics, and I want to perform the substraction of only those emails that are in both transactions. I tried using filters with ISDEFINED for the email in each transaction to see if the metric will only give the emails that are shared in both transactions but I couldn’t do the right formula. If would be very helpful if you can point me in the right direction?Thank you very much in advance! Jose
It is back-to-school time, no better time to launch our Pigment Academy! No need to wait outside for the bus because these on-demand learning paths are available 24x7 from the comfort of your home. The team will also be posting new short tutorials every month so make sure to keep checking back in. But that’s not all! Academy and Community are also BFFs – Enter a keyword or two in the Community search and you’ll find resources from both. Plus, throughout Academy, you’ll also find links to relevant and helpful articles on Community. Got questions as you complete the training or want show off your new lunchbox? As you progress, the Academy Study Hall is the best place to ask questions about the lessons and share ideas about Pigment training.So, what are you waiting for? Enroll in Pigment Academy today!
Hi team!I would like some help, as I cannot find out what is going wrong.I have a metric that we add adjustments on top of our initial forecast and along with other metrics they all end up in a table. My problem is that for one specific line the number is not correct, in fact, i drill down to see where this number comes from but the amounts that I see (the correct ones) don’t give the amount shown in the table! So I am trying to understand what else is pulling but not showing so as to fix it! Any idea what could it be?
Dears, I am trying to filter by the current month in each of the metrics, I would use TODAY() function in excel, but since there is no function like that on Pigment. As a workaround I created a metric that I called Current Date (Month Dimension) , which I will update monthly, so that I can filter by that metric and automatically update all the other metrics. IF('MRR Be Churn Analysis'=1,TRUE)[FILTER:'Data Hub'::Month='Current Date'] However, I did not work, do you have any suggestion or guidance? Thank you very much in advance! Jose
Dears, I have a dimension “Self Served” that I get from an extract directly intro a transaction list A, in this transaction list A I have another dimension “Client ID” that is shared with another transaction list B, and I added another column in transaction list B to get the dimension “Self Served” but I get an error, is there a way to connect both transaction lists with something similar to a vlook up in Excel? I dont want to keep importing or manually adding “Self Served” into the dimension “Client ID” so I can use the function ITEM. I am trying to automate the data so it comes directly from the extracts. Thank you very much for your insights! BR,Jose
Dear Community, I have a transaction list in which I want to add a percentage based on a dimension I have, but I get the sum of the all the percentages in every line. I want to do what would be a simple VLook up in excel from the following dimension: If you have any guidance or any idea how to do that on Pigment it would really help me. My end goal is to have each amount that is on every line multiplied by a percentage based on the dimension name of the offer. Thank you very much in advance!Jose
Hello community 😀Currently I have this metric which gives me Paid costs by country.I want to allocate the “Global” row to other countries knowing that i have an allocation metric of contries according to their weight of sales compared to the total sales. I was thinking about doing someting like this - but it is not working : Could you help me please ? :) Thanks a lot!
Dear Community, I have the following metric:BillsMonths.'MRR SS'[BY:BillsMonths.Mail,BillsMonths.Month] I am trying to create another metric based on the previous metric, with the following formula:COUNTOF('Billsmonth Spread')[BY SUM: 'Data Hub'::BillsMonths.Month] And I get the next error in the playground formulaAnd if I create the metric with the dimension I get the same number for every monthWould you please point me in the right direction? Thank you very much in advance!Jose
Hello all, I want to aggregate 7 metrics with the following dimensions: version, month, order_id. One of these has checkout_id dimensions in addition, then i removed it. In addition, 2 metrics (Offer_order_Level and Wallet_order_level) have day in dimension structure instead of month (for a matter of optimization), however, month is a property of day. I do not achieved to aggregate those metrics. Could you help me please? Thanks a lot 😉
Dear Community, I have the following formula in a metric coming from two other metrics 'MRR BE + Ajouts manuels and MRR Facturé (= Comptable) The result of the metric is neither of the two metrics coming from the IF formula,Would you point in the right direction? or help me figure out what is wrong with the formula? Thank you very much in advance!Jose
Hi, I am trying to use BY LASTNONBLANK function to capture the last non blank value in “A” metric (with dimension Month), and get this value in “B” metric (no dimensions there), so that in B metric I will have only the value from most recent Month.I used the following formula in metric B:“Metric A” [BY LASTNONBLANK: Month]The result I am receiving is the sum of all months (the same result I would receive if left “Metric A” in formula without any modifiers).Do you know how I can retrieve the last nonblank value from the Metric?
Dears,I would like to create a metric where I have the MRR BE, coming from the transaction list Requests MRR BE, summed by the QuickbooksId and by the Month, both of which are mapped as a dimension in my transaction list.I have the following formula: 'Requests MRR BE'.'MRR BE'[BY:'Requests MRR BE'.QuickbooksId,'Requests MRR BE'.Month] It works for QuickbooksId (ID number) , but it does not sum by Month. It ends up giving me the total per QuickbooksId (ID number) for every month of every year instead of allocating the sum of the ID per month of the year. Thank you very much in advance! Best,Jose
Our budget construction is based on input of cost center managers, so they can add headcount and expenses as they wish.How can I give them access only to their own cost centers? With that, they would only be able to see data about this specific cost center.I’m tring something like that below but I don’t know how to link the user’s scope with the Cost center manager’s role.
Hello community 😊I need to realocate offer amount in proportion of GMS order weight on checkout GMS total weight (i.e. 1 checkout contains X orders). Below you have for example Order 1303589 representing 44% of checkout 351970. Then, i need to relocate 44% of my amount offer to this order. I take the amount offer in a transaction list “LT_Offer”:See below the “TL_Offer”. I want a metric which returns in column the checkout ID, the order ID and reallocated offer amount (which is the offer amount * allocation_order_on_checkout metric)Condition: I only want computing allocated amount offer when the Id_order in TL_Offer is empty (in fact, if there is an id_order, the amount have been already assgined to the order). Here in the same example, i need to reallocate 59€ at 44% to the first order and 56% to the 2nd order.Knowing that I have a mapping between order_id and checkout_id in the order_id dimension: I want this final metric working: Thanks a lot ;) !!
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.